• Sign In
  • Register
Connix LED- Now Back in Stock. Award winning innovation from Sparex!

Electrical Testers

per page

List  Grid 

  • 12v Electrical Circuit Tester

    S.12339 - 12v Electrical Circuit Tester

    Allows easy tracing of electrical faults. All metal construction with steel probe. To verify isolated cables, unscrew the protective cap, earth the crocodile terminal and pierce the cable covering with the steel probe. DO NOT LEAVE UNDER LOAD FOR MORE THAN 30 SECONDS. *FOR USE ON 12V DC CIRCUITS ONLY.
  • 12v Electrical Circuit Tester

    S.12349 - 12v Electrical Circuit Tester

    DO NOT LEAVE UNDER LOAD FOR MORE THAN 30 SECONDS. *FOR USE ON 12V DC CIRCUITS ONLY.
  • Diagnostic test lead set

    S.151759 - Diagnostic test lead set

    Complete lead kit for Automotive diagnostics. Content almost all connection leads for connecting to sensors, valves, connectors, injectors All leads are arranged properly in pairs “Male & Female″ and by terminal sizes Includes ATC adapter Mini and Maxi fuses and ATC Current loop to be used with an Amp Clamp ncludes Piercing Extra Sharp Probes . This innovative design gives enough retention force to pierce through the wire’s insulator New variable resistor of with 10KO (instead of 5KO ) dial indicator. Quick and easy way of resistance adjustment without the help of a multi-meter during simulation of resistance related sensing devices Airbags simulator : Used to confirm SRS Airbag power input by connecting it first to check for any short circuit before installing new SRS Replaceable resistors! 3 of 2 ohms - 2,2 ohms – 2,7ohms LED Stroboscope: For checking series of terminals for correct wiring. Also for pulse or signal comparison between injectors. LED turns redfor reverse polarity. LED turns green for correct polarity Also includes general purpose components; Alligator clips, Banana plug to be used with multimeters, 3 ways extension plugs and detachable testprobes Ultra thin lead for multipins connector
  • DIGITAL CLAMP METER WITH INTEGRATED DISPLAY

    S.151755 - DIGITAL CLAMP METER WITH INTEGRATED DISPLAY

    AC/DC Current to 600A (ideal for automotive applications) AC/DC Voltage to 600V  Resistance, temperature Continuity beeper and diode test Auto Power Off
  • Digital multimeter

    S.151762 - Digital multimeter

    Measures: Voltage DC : 600V Voltage AC : 600V Current DC : 10A Current AC : 10A Resistance : 20MO Diode check : test current of 1mA maximum, open circuit voltage 2.8V DC typical Continuity test : audible signal will sound if the resistance is less than approximately 30O Temperature: from -20°C to 760°C
  • Electrical Voltage tester

    S.151758 - Electrical Voltage tester

    VAT VOLTAGE AND CONTINUITY TESTER : Voltage, continuity, polarity and phase tester with flashlight Large backlit LCD display with bargraph LCD AC/DC voltage indication: 6V, 12V, 24V, 50V, 120V, 230V, 400V, 690V Polarity detection shown on the LCD display  Continuity test with audible tone Phase rotation test  Integrated flashlight IP64 housing dust- & waterproof Overvoltage class CAT III 1000V/ CAT IV 600V VAT self-test button
  • Heavy Duty Circuit Tester

    S.28681 - Heavy Duty Circuit Tester

    Suitable for testing circuits from 6V to 24V. Polycarbonate handle. Steel contact probe. 1.5m heavy duty lead fitted with crocodile clip.
  • Multimeter

    S.151761 - Multimeter

    Specially designed for all automotive applications Functions: voltage : AC (3,2V - 1000V) DC (3,2V - 750V) current : AC (32mA - 10A) DC (32mA - 300mA) resistance from 320O to 320KO  frequency from 0,01Hz to 32kHz diode check  RPM from 0 to 12,000 temp. measurement (-20°C - +1370°C)  Automatically turns off after 10 min Accessories: test and temperature probes, test clamps, inductive clamp for tachometer
  • Needle test probe set

    S.151760 - Needle test probe set

    This kit of high quality test leads has been designed for the automotive technician. Each kit includes: A pair of double-insulated silicone test leads, terminated on one side by an insulated straight connector, and on the other by a sheathed right-angle connector, both compatible with standard 4mm connectors A pair of spades for intrusive measurements, ideal when the inverted test is not an option -> category: 30V A pair of flexible measuring needles that allow you to pass through the rubber seal on some connectors without damaging it Test leads can withstand high temperatures (example: exhaust manifolds or soldering iron tip) -> category: 1000V CAT II
per page

List  Grid 

The Sparex website uses cookies to enhance your shopping experience, to improve functionality and to analyse website traffic.
For more information on how we use cookies please click here to read our privacy policy.

© Sparex Ltd. All rights reserved. Sparex Limited is a company registered in England & Wales with number 841771 and VAT Number GB 754 8199 87

These parts are Sparex parts and are not manufactured by the Original Equipment Manufacturer (OEM). Original Manufacturer's names, part numbers and descriptions are quoted for reference purposes only and are not intended to indicate or suggest that our replacement parts are made by the OEM.