Flexible sealant paste that changes to a pliable, non-hardening film through solvent evaporation which seals flanges, fittings, connections, etc.LOCTITE® MR 5922 is a black, viscous, solvent-based, slow drying, flexible setting paste that changes to a pliable, non-hardening film through solvent evaporation. It is based on resin, isopropanol and fillers. It seals flanges, fittings, connections and flexible assemblies against leakage. It increases the reliability of gasket seals and it can be used for the repair of damaged pre-cut gaskets.Extends gasket lifePrevents leaksSlow dryingSpecifically designed to improve the sealing performance of pre-formed gaskets made of cork, metal, plastic, rubber, etc. in non-rigid assembliesFlexible settingIncreases the reliability of gasket seals
Retaining Compound - high strength. Ideal for bearings. For use on close-fitting cylindrical parts. High oil tolerance.LOCTITE® 603 is a high-strength retaining compound. Designed for the bonding of cylindrical fitting parts, especially for sintered bearings and also where consistently clean surfaces cannot be assured. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It has a high oil tolerance.High-strength retaining compoundEspecially suitable for sintered bearingsHigh oil tolerance
Retaining Compound - high strength. Ideal for bearings. For use on close-fitting cylindrical parts. High oil tolerance.LOCTITE® 603 is a high-strength retaining compound. Designed for the bonding of cylindrical fitting parts, especially for sintered bearings and also where consistently clean surfaces cannot be assured. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It has a high oil tolerance.High-strength retaining compoundEspecially suitable for sintered bearingsHigh oil tolerance
Retaining Compound - high strength. Ideal for bearings. For use on close-fitting cylindrical parts. High oil tolerance.LOCTITE® 603 is a high-strength retaining compound. Designed for the bonding of cylindrical fitting parts, especially for sintered bearings and also where consistently clean surfaces cannot be assured. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It has a high oil tolerance.High-strength retaining compoundEspecially suitable for sintered bearingsHigh oil tolerance
LOCTITE® 638 is a high strength, fast curing, general purpose retaining compound.LOCTITE® 638 is designed for the bonding of cylindrical fitting parts, particularly with narrow bond gaps approaching 0.25 mm. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It not only works on active metals but also on passive substrates, exhibiting robust cure performance. The product offers high-temperature performance and good oil tolerance, and tolerates minor surface contaminants.Tolerates minor contaminants, including industrial oilsHigh strength on all metals, including passive substrates (e.g. stainless steel)High temperature resistanceIdeal for shafts, gears, pulleys and similar cylindrical partsDVGW Approval (EN 751-1): NG-5146AR0619P1 NSF Reg. No.: 123010WRAS Approval (BS 6920): 0511518
LOCTITE® 638 is a high strength, fast curing, general purpose retaining compound.LOCTITE® 638 is designed for the bonding of cylindrical fitting parts, particularly with narrow bond gaps approaching 0.25 mm. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It not only works on active metals but also on passive substrates, exhibiting robust cure performance. The product offers high-temperature performance and good oil tolerance, and tolerates minor surface contaminants.Tolerates minor contaminants, including industrial oilsHigh strength on all metals, including passive substrates (e.g. stainless steel)High temperature resistanceIdeal for shafts, gears, pulleys and similar cylindrical partsDVGW Approval (EN 751-1): NG-5146AR0619P1 NSF Reg. No.: 123010WRAS Approval (BS 6920): 0511518
LOCTITE® 638 is a high strength, fast curing, general purpose retaining compound.LOCTITE® 638 is designed for the bonding of cylindrical fitting parts, particularly with narrow bond gaps approaching 0.25 mm. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It not only works on active metals but also on passive substrates, exhibiting robust cure performance. The product offers high-temperature performance and good oil tolerance, and tolerates minor surface contaminants.Tolerates minor contaminants, including industrial oilsHigh strength on all metals, including passive substrates (e.g. stainless steel)High temperature resistanceIdeal for shafts, gears, pulleys and similar cylindrical partsDVGW Approval (EN 751-1): NG-5146AR0619P1 NSF Reg. No.: 123010WRAS Approval (BS 6920): 0511518
Retaining Compound - medium strength. If disassembly is required. Ideal for parts that need subsequent dismantling.LOCTITE® 641 is designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for servicing operations. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings.Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings
Retaining Compound - medium strength. If disassembly is required. Ideal for parts that need subsequent dismantling.LOCTITE® 641 is designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for servicing operations. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings.Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings
LOCTITE® 648 is a low viscosity, high strength retaining compound with high temperature resistance. Ideal for retention of parts with a clearance or interference fit.LOCTITE® 648 is designed for the bonding of cylindrical fitting parts. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It exhibits a robust curing performance. The product also works on passive substrates and offers high-temperature performance and good oil tolerance.High temperature resistanceProven to be tolerant of minor contamination due to industrial oilsIdeal for retention of parts with a clearance or interference fitHigh strength on all metals, including passive substrates (e.g. stainless steel)DVGW Approval (EN 751-1): NG 5146C00236P1 NSF Reg. No.: 148350WRAS Approval (BS 6920): 0808532
LOCTITE® 648 is a low viscosity, high strength retaining compound with high temperature resistance. Ideal for retention of parts with a clearance or interference fit.LOCTITE® 648 is designed for the bonding of cylindrical fitting parts. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It exhibits a robust curing performance. The product also works on passive substrates and offers high-temperature performance and good oil tolerance.High temperature resistanceProven to be tolerant of minor contamination due to industrial oilsIdeal for retention of parts with a clearance or interference fitHigh strength on all metals, including passive substrates (e.g. stainless steel)DVGW Approval (EN 751-1): NG 5146C00236P1 NSF Reg. No.: 148350WRAS Approval (BS 6920): 0808532
Structural Bonding - 2-component five-minute epoxy. General purpose. Excellent water resistance.LOCTITE® EA 3430 is a five-minute, 2-component epoxy adhesive that ensures an optically clear bond line. The product develops high strength on a wide range of substrates and is water resistant. This adhesive is a general purpose bonder and ideal for many DIY applications. Due to the very clear bond line, it is also the product of choice for bonding glass, decorative panels and display. The medium viscosity and fast fixture time at room temperature ensure easy application.Ultra-clear bond lineEasy and fast to apply at room temperatureWater resistantGeneral purpose bonder - suitable for a wide range of substrates
LOCTITE® LB 8008 C5-A is an exclusive anti-seize lubricant in a brush top form with copper and graphite suspended in high quality grease. It has an NLGI Grade of 0.LOCTITE® LB 8008 C5-A anti-seize lubricant paste is packaged in a brush top can, with copper and graphite suspended in a high quality grease. Applications include screws, nuts, pipes, exhaust bolts and brake caliper bolts. Resistant to extremely high temperatures (up to +980°C) and protects from rust, corrosion, galling and seizing. It has an NLGI Grade of 0.Resistant to very high temperatures up to +980°CUnique brush topIt has an NLGI grade of 0Protects from rust, corrosion, galling and seizingUsed for screws, nuts, pipes, exhaust bolts and brake calliper bolts
Lubricant - aluminium anti-seize spray. Heavy-duty and petroleum-based compound. High temperature resistance.LOCTITE® LB 8151 is a heavy-duty anti-seize spray designed to prevent joints from seizing and corroding when exposed to high temperatures such as encountered in the exhaust from combustion engines and in fittings for oil and gas burners. The product is typically used in applications with an operating temperature range of -30°C to +900°C.Heavy-duty, temperature resistant, petroleum-based lubricant compoundFortified with graphite and metallic flakesFor use in assemblies up to 900°CInert and will not evaporate or harden in extreme cold or heat
Solvent-based (non-CFC), general purpose cleaner for plastic parts. Will remove heavy oils without risk of stress cracks.LOCTITE® SF 7070 is a solvent-based (non-CFC) parts cleaner and degreaser formulated specifically to prepare plastic components ready for bonding with adhesives. Suitable for use as a spray or in immersion cleaning at room temperature, the product is able to remove most oils, greases, lubrication fluids, metal cuttings and fines from plastic parts without the risk of stress cracks.Solvent-based general parts cleanerDesigned for use on plastic componentsCan be applied by spray or immersionNo risk of stress cracks
LOCTITE® SF 7455 Accelerator is a general purpose, clear to light amber colored, cure-speed accelerator for LOCTITE® cyanoacrylate (instant) adhesives and is especially suited for post-application.LOCTITE® SF 7455 Accelerator is a colourless, amine-based accelerator used to increase the cure speed of LOCTITE® instant adhesives. It is suitable for both pre- and post-application but ensures rapid fixturing when used post-application on instant adhesives. This product is typically used for securing wires or coils to PCBs, tamper-proofing adjustable components, mounting stand-offs, edge guides, etc. It can bond dissimilar materials, such as metals, glass or ceramics.General purposeFast fixturing between close fitting partsFor post-applicationFor all substratesIMPORTANT NOTE: This product was upgraded in 2021/2022. Please utilize the product IDH/item number to ensure correct SDS is downloaded.
Transparent, yellow to amber liquid activator used for increasing the cure speed of LOCTITE® anaerobic products under low prevailing temperatures.LOCTITE® SF 7471 is transparent, yellow to amber liquid activator used where increased cure speed of LOCTITE® anaerobic products is required. It is especially recommended for applications with passive metals or inert surfaces and with large bond gaps. LOCTITE® SF 7471 is particularly recommended when prevailing temperature is low (Less than+15°C).For large bond gapsSpeeds up cure on passive and active surfacesOn-part life Less than or = 7 days
LOCTITE® SF 7649 is a solvent-based activator for surface preparation that provides for low temperature curing.LOCTITE® SF 7649 is designed to promote the curing speed of LOCTITE® anaerobic adhesives and sealants without any significant loss of joint strength. It is especially recommended for applications with passive metals or inert surfaces and with large bond gaps. LOCTITE® SF 7649 offers good performance at low cure temperatures, and is recommended when the application temperature is below 15°C.Increases cure speed on passive and inactive surfacesFor low-temperature curing (Less than5°C)For large bond gaps
LOCTITE® SF 770 is a polyolefin primer for surface preparation and is ideal for use with difficult-to-bond plastics.LOCTITE® SF 770 is a primer used to make polyolefin and other low-energy surfaces suitable for bonding with LOCTITE® instant adhesives. The cured performance of LOCTITE® instant adhesives is ensured on such treated surfaces. It is only recommended for difficult-to-bond substrates which include polyethylene, polypropylene, polytetrafluoroethylene (PTFE) and thermoplastic rubber materials. LOCTITE® SF 770 is not recommended in assemblies where high peel strength is required.Improves adhesion of instant adhesives to polyolefins and other low surface energy plasticsOnly for difficult-to-bond plasticsIMPORTANT NOTE: This product was upgraded in 2021/2022. Please utilize the product IDH/item number to ensure correct SDS is downloaded.
Self-fusing silicone rubber wrap for temporary repairs on flexible hoses and pipes. Resistant to UV light, salt water, fuels and acids.LOCTITE® SI 5075 is a non-sticky, self-fusing, multi-purpose wrap for tape-based repair situations. Offering a tensile shear strength of 50 kgcm², the tape stretches to three times its size and seals instantly. It is resistant to UV, salt water, fuels and acids. LOCTITE® SI 5075 also offers dielectric strength up to 15kVmm and a service temperature range of -54 to +260°C.Reliable, temporary repairs on a variety of substratesSealing and insulating silicone rubber wrapSelf-fusingResistant to UV, salt water, fuels and acids
Thread Sealant - low strength. Ideal for use on threaded plastic or plasticmetal fittings carrying hot or cold water.LOCTITE® SI 5331 is designed for the locking and sealing of plastic and metal fittings carrying hot or cold water, e.g. industrial and agricultural plastic water pipe systems or drainage systems. It carries certain approvals and certifications: WRC listed, meets BS 6920 for potable water: 0706521 DVGW approval, tested in accordance with EN 751-1; P1 NSF Reg. No.: 123620General purpose liquid thread sealant for sealing metal and plastic threads in fittings carrying hot or cold waterWRC listed, meets BS 6920 for potable water: 0706521Locks connection against vibration-induced looseningP1 NSF Reg. No.: 123620DVGW approval, tested in accordance with EN 751-1
1-part, clear industrial acetoxy silicone sealantadhesive. Its flexibility offers enhanced load bearing and shock absorbing characteristics.LOCTITE® SI 5366 is a 1-part, clear industrial acetoxy silicone sealantadhesive, designed specifically to ensure perfect sealing as well as bonding and protection. Typical applications include sealing side windows in trains, sealing heat sources (ovens, heat exchangers, steam circuits, water heaters), providing protectioninsulation of electrical boxes, bonding of HCR silicones and in general maintenance. It offers high elongation at break of 530%.Specially formulated for perfect sealing1-part product - requires no mixingRapid skin formationEnhances load bearing and shock absorption of bonds
LOCTITE® SI 5368 is a one component, black, acetoxy silicone paste that is designed for sealing and bonding applications.LOCTITE® SI 5368 is a black silicone paste that offers excellent bonding and sealing, as well as high temperature protection for a variety of industrial applications. Typical applications include household electrical appliances as well as automotive and aeronautical industries. Suitable for temperatures up to 250°C. This product becomes tack free on exposure to atmospheric moisture within 5 minutes at room temperature.Cure: Room temperature vulcanizing (RTV)High temperature protectionSuitable for temperatures up to 250°C
Silicone Sealant - excellent adhesive strength. Ideal for applications involving large gaps. Label-free. Excellent resistance against waterglycol.LOCTITE® SI 5660 is a silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket. The nature of LOCTITE® SI 5660 reduces the migration of liquid product after application to the part. It has been designed especially for gasketing applications where good resistance against oils and coolants is required. Typical applications include transmissions and cast metal housings. The product has leading health and safety features.Flange sealant for flexible flangesOil resistantGrey colourExcellent glycol resistanceLeading in health & safety features
Silicone-based gasketing product suitable for various substrates. Good resistance to oil and joint movement.LOCTITE® SI 5900 is a low strength, moisture-cured, thixotropic silicone-based paste. Typical applications include stamped sheet metal covers (timing covers and oil sumps). It exhibits a rapid skin-over time of 15 min and is suitable for gaps up to 1 mm. As a single component it requires no mixing.Good oil resistanceWithstands joint movementReduces migration of liquid after applicationAdheres to metal, plastic, glass and ceramic materials
LOCTITE® SI 5910 is a low strength gasketing product for flexible flanges that has good resistance to oil and joint movement.LOCTITE® SI 5910 is a low strength, silicone-based gasketing product designed for use on flexible flanges with machined or cast surfaces (metal or plastic). It is suitable for gaps up to 1 mm and offers a cure-through volume (in 24 h) of 2.75 mm. Typical applications include stamped sheet metal covers (timing covers and oil sumps).Good resistance to oil and joint movementCan be supplied in cartridges, tubes or rocep cansFor use with flexible flangesReduces migration of liquid after application
Gasketing Product - multi-purpose flexible silicone sealant. Ideal for use on flexible flanges, machined or cast surfaces, metal or plastic.LOCTITE® SI 5926 is a multi-purpose flexible silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket. This product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Typical applications include valve covers, timing gear covers, differential covers, oil pans, transmission pans, water pumps, and thermostat housings. This product is typically used in applications with an operating temperature range of -54°C to 204°C.Multi-purpose flexible silicone sealant. Can be used on metal, plastic and painted partsResists vibration, thermal expansion and contractionOperating temperature range of -54°C to +150°C.
Clear, 1-part, thixotropic, room temperature-cure, acetoxy silicone vulcanizing compound paste sealant with an acetic acid odour.LOCTITE® SI 595 is a clear, 1-part, thixotropic, room temperature vulcanizing, acetoxy silicone vulcanizing compound paste sealant with an acetic acid odour. It is designed as an excellent adhesive sealant for mechanical assemblies. Typical applications include electrical insulation, protection of leads from mechanical shock, trim bonding, and sealing of ductwork, vents, flues, doors, and windows.Certified to ANSINSF Standard 51 for use with plastic materials and components used in food equipment not exceeding +204°C.Classified by Underwriters Laboratories Inc.® E257711 - Plastics & ComponentsNon-slumpingSuperior adhesion and flexibilitySeals out moisture and contaminantsNon-flammableNon-toxicFills large cracks and seamsResists aging, weathering and thermal cycling without hardening, shrinking or crackingCures on exposure to moisture in the air to form a tough, flexible, silicone rubber sealFormulated to withstand extreme temperature cycling, UV light and ozoneDesigned for superior bonding and sealing properties to most surfaces (not recommended for concrete)
Metallic black, 1-part, thixotropic, room temperature vulcanizing oxime silicone paste sealant.LOCTITE® SI 598 is a metallic black, 1-part, thixotropic, room temperature vulcanizing oxime silicone paste sealant. It cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. It resists ageing, weathering and thermal cycling without hardening, shrinking or cracking. This product is typically used in applications with an operating range of -54 to +260°C.Enhances load bearing & shock absorbing characteristics of the bond areaExcellent resistance to automotive engine oilsTypical applications include oil pans, transmission pans, valve covers, valves and guides, timing gear covers, and differential covers
BONDLOC® B242, B270, B2001, B3294, B401, B542, B567, B574, B577, B603, B641& RVT123.With a selection of 12 different products in small pack sizes this compact case is ideal for handing out to all MRO engineers as an emergency adhesive kit. Carefully selected to cover the widest range of applications with handy pack sizes that are ideal for small jobs this low cost kit is perfect for anyone that wants an adhesive kit “just in case” of an emergency.Contents:B242 Nutlock 10mlB270 Studlock 10mlB2001 Steel Epoxy Stick 50gB3294 Plastic Weld 28mlB401 Cyanoacrylate Adhesive 20gB542 Hydraulic Seal and Locker 10mlB567 Stainless Steel Pipe Seal 50mlB574 Instant Gasket 50mlB577 Pipeseal 50mlB603 Retainer 10mlB641 Bearing Fit 10mlRTV123 Silicone 80ml
Body Repair - Plastic repair set for paintable plastic parts.TEROSON® PLASTIC REPAIR SET includes a set of products that are necessary for basic repair tasks on paintable interior and exterior plastic parts.The products are particularly used for minor damage such as scratches or holes in bumpers, spoilers, aprons, etc.The following products are included in the kit:2 bags 2 x 25 ml TEROSON® PU 92251 bag 2 x 25 ml TEROSON® PU 9225 SF6 static mixers150 ml spray can of TEROSON® 1501 l can of TEROSON® VR 101 TEROSON® ET Plastic Glassfib Matt1 TEROMIX hand Gun1 plastic spatulaInstruction leaflet
Bar’s Nural contains a mixture of aggressive buffing agents that works to clean and scrub away corrosion build-up and sludge within your vehicle’s cooling system.This allows coolant to flow freely and maintaining optimum heat transfer to help ensure your vehicle’s engine remains at its optimal operating temperature.Bar's Leaks Nural does not contain any acids and will not damage rubber, plastic, or light metals.Treats 12liters.
Radiator Sealant - Stops coolant leaks in radiator, block, cylinder heads, core plugs etc. Inhibits rust & corrosion. Lubricates water pump. For cooling systems of up to 17 litres (3.7 Imp gallons). Used & recommended by motor manufacturers worldwide.
BONDLOC® RTVNC Neutral Cure Silicone Adhesive, Clear (310ml).RTVNC silicone is a single component, low modulus, oxime curing silicone sealant/adhesive.Applications: RTVNC silicone can be used on all glazing and industrial work along with common building and construction joints. BNC silicone can be used on a wide variety of substrates including metal, wood, painted metals, glass, PVC, polycarbonate, polyacrylate and many others. RTVNC silicone conforms to BS 5889 type A.Service temperature range: -40°C - +180°C.Skinning Time: 5 mins 20°C
BONDLOC® RTV Silicone, Black (310ml).Flexible silicone rubber that bonds, fills and seals permanently and can be used on a wide variety of rubber, plastic and metal surfaces.Provides a seal against water & oils and can join lightweight components in many maintenance and engineering areas.
BONDLOC® RTV Silicone, Black (80ml).Flexible silicone rubber that bonds, fills and seals permanently and can be used on a wide variety of rubber, plastic and metal surfaces.Provides a seal against water & oils and can join lightweight components in many maintenance and engineering areas.
BONDLOC® RTV1 Acetoxy Silicone adhesive (80ml).Fleixible Silicone Rubber that bonds, fills & seals permanently.Can be used on all glazing and industrial work along with common building and construction joints. Also suitable for use on a wide range of substrates including metal, wood, painted metals, glass, PVC, polycarbonate, polyacrylate and many others.Service temperature range: -40°C - +150°C.Skinning Time: 5 mins 20°C.
BONDLOC® NC Silicone Sealant, Grey (310ml)Specified by Ransomes to replace the Dana wheel and Gasket A815531 for T series tractor, motor 213D as the gasket is no longer available.
BONDLOC® Display Stand for B2001 (S.128795) Steel Epoxy Putty complete with x24 50g sticks.B2001 is a hand kneadable, speciality epoxy putty that mixes in 1 minute for permanent repairs to many substrates.Contains fading black dye that becomes grey after mixing.May be applied under water (fresh or salt).Bonds to fibreglass, metal, wood, concrete and glass.Will not yellow with exposure to UV.Applications: Repairing tanks and drums, patching holes in pipes, stopping leaks and repairing porosity holes in castings.Full Cure: 24 hrsSandable: 20 mins.
LOCTITE® Super Glue (3ml).General purpose for bonding most materials such as plastic, rubber, metal, card and woodGives very high strength bonds on close fitting parts.
BONDLOC® B495 Instant adhesive, Black (20gr).Suitable for bonding a range of materials including metals, plastics, elastomers, wood, paper, leather and fabric.Tensile strength 15 - 25Nmm².Fixture Time: Less than 5 seconds
BONDLOC® BCA brushable Superglue (5gr).Suitable for bonding metals, plastics, wood, ceramics, rubber, leather card, glass and many other materials.Flash Point : 85°C.Fixture Time: Less than 5 seconds.
