Discrete hardware for installation into any vehiclePowered up with the ignitionBuilt in GPS10hz GPS receiver WAAS EGNOS GLONASSBuilt in Terrain CompensationBluetooth to Android tabletTablet charging point3D Guidance with straight and curved modesField area measurementField recognitionStore Farm / Fields BoundariesMulti language 12V Power Input5V Power Output (for charging display)
Discrete hardware for installation into any vehiclePowered up with the ignitionBuilt in GPS10hz GPS receiver WAAS EGNOS GLONASSBuilt in Terrain Compensation Bluetooth to Android tabletTablet charging point3D Guidance with straight and curved modesField area measurementField recognitionStore Farm / Fields Boundaries Multi language 12V Power Input5V Power Output (for charging display)Headland WarningHeadland guidancePause and resuming of JobsJob recordingAutomatic recording optionSynchronizing of data 3G or WifiTracking 3G or Wifi
Easy to drive in straight, parallel lines Eliminate overlaps and missed spotsFast and stable dual-constellation GPS receiverCan work in stand-alone mode with ±20 cm accuracy or at RTK mode with ±2cm accuracyWork at night or in low visibilitySave up to 10% of your input and diesel costsBuilt-in RTK precision abilities with NTRIP correction (public network or via a FieldBee Base Station).Ideal for farmers making their first step into guidance systems.Required for the FieldBee PowerSteer automatic steering systemL2 receiver/ controllerFieldBee RTK L2 Receiver works as a stand-alone GNSS antenna that improves GPS accuracy and can receive the RTK signal from both private base stations and local NTRIP providers like FLEPOS, SAPOS, MoveRTK, etc. FieldBee’s RTK L2 receiver is made to achieve the highest precision, including on fields with hills and signal obstructions. It provides a stable correction, quick signal gain and re-gain. It is a prerequisite for working with FieldBee Autosteer products.The ASB receiver/controller includes terrain compensation sensor, autosteer control ECU and is future-ready for upcoming implement control functionalities.10'' tabletKcosit K100 is a rugged Android tablet, reliable in full sunlight and designed for field-going vehicle installation. It is widely used in advanced farming systems, mining, logging, etc. The tablet provides a controlled software environment, which eliminates any risks of manufacturer version updates disrupting the FieldBee app operation.Water and dustproof: IP67MIL-STD-810GReal-time trackingCANBusReplaceable batteryFingerprint unlockCharging and mounting dock
Hands-free automatic steering An UPGRADE to the FieldBee Manual Guidance kit±2cm accuracy on all terrainsEuropean-builtQuiet operation with DirectDriveErgonomic, quality steering wheelWorks with all front-steering tractor models, including open cabinEasy manual override when drivingOn/ Off physical switch for extra safetySuper-fast installation and only a few componentsIP 67, water and dust tightRequires RTK correction signal (from any NTRIP network or from a FieldBee RTK base station)A steering unit which replaces the original steering wheel of the tractor. Consists of 3 main parts:1) Steering wheel: Steering wheel specially designed for tractors. Easy to install and switch between different machines, ergonomic and quality design. 2) High torque steering wheel actuator, complete with a specifically-suitable shaft adapter, allowing for installation on many tractor models. The motor has a small number of mechanical moving parts and a very low noise level, thanks to the use of Direct Drive technology. 3) Anti-rotation bracket. This part fixates the PowerWheel to the tractor's steering wheel shaft. The PowerWheel connects to the anti-rotation bracket using a dedicated pin(s).
A smart dual-constellation GPS receiver that transmits your own free RTK correction signal.Provides ±1 cm accuracyTransmits RTK correction via Radio and/ or InternetCan be freely shared with your neighbours: up to 200 GPS receivers can use one base station.Can be used in network mode, covering a larger region with several base stations. FieldBee RTK precision, achieved with the FieldBee Base Station, as an upgrade to the FieldBee Manual Guidance kitFieldBee RTK L2 Base Station is made to achieve the highest precision on fields with hills and signal obstructions.L2 Base Station transmits RTK correction at 20+ km radius via the internet and provides a high +/- 1 cm accuracy on the field.The Base Station has a stable signal and works very well with the PowerSteer.Place the RTK L2 base station on a tripod in your field for use in radio mode (no internet required) or on the roof of your house/ barn for stable use with signal transmission via the internet. Place the L2 receiver/ controller on your tractor and connect it to receive the RTK correction signal via radio or internet (or both)