4 pin adaptor cable (camera) to 5 pin (terminal).Suitable for Agco C1000 monitors, Datatronic4 monitors (including Agco DT-B series) and Challenger C-series monitor.Fits into the 5 pin M12 connector which is located at the back of the arm rest.The cable terminals are moulded plugs and are water and dust resistant.Monitor not included Cable length: 1M
4 pin adaptor cable (camera) to 5 pin (terminal) for Fendt Vario models that locates in the 5 pin M12 connector which is located at the back of the arm rest. The cable terminals are moulded plugs and are water and dust resistant. Cable length: 1M
Operators use dallas key-style fobs to disable the immobiliser and start the vehicle.Automatically immobilises ignition and starter motor 30 seconds after the ignition is turned Off.Supplied with two dallas keys.LED status indicator.Thatcham 2 approved.Should be installed by an accredited engineer to fulfil Thatcham approval.
Protects your vehicle against unauthorised useAfter its installation, the immobilizer is fully integrated and cannot be recognized by unauthorized personsThe electronic key makes use of contact-free transponder technologyThe transponder (sender and receiver unit)has its own battery-free power supply and is permanently integrated into the mechanical key of the start switchRecovery of a stolen vehicle leads to economic loss and long downtimes. An immobilizer can make theft more difficult.
A8510 Key ProgramingEnsure the immobiliser is disarmed :-1) Switch the ignition ON and OFF three times then back to the ON position within seven seconds.2) The LED on the dashboard will light up signaling the unit is in programming mode.3) Touch an already programmed key onto receptical, the LED will extinguish for one second4) Repeat step 3 for all other keys (Max of 4 touch keys)5) To exit programming switch off the ignition key (unit will automatically exit programming after four keys)NOTE :-1) Programing procedure can only entered with the system disarmed.2) If all keys have been lost the system will need to be replaced
An innovative and convenient way of illuminating and visualising the area around your tractor and implement. A high-power LED flood beam work light with a built-in high-resolution CMOS colour camera to provide clear visibility in the darkest environments and hard to see applications.Fully compatible as an additional camera with S.115175, S.115176 & S.23053 Wired camera systems.See Specifications for product details.
An innovative and convenient way of illuminating and visualising the area around your tractor and implement. A high-power LED flood beam work light with a built-in high-resolution CMOS colour camera to provide clear visibility in the darkest environments and hard to see applications.Fully compatible as an additional camera with S.143668 & S.143669 Wireless camera systems.See Specifications for product details.
MachineCam HD is a wireless camera system with very high image quality (HD) and long range (300 m). Developed to perform without interference in the toughest of conditions. Often used for harvesting, baling, reversing, etc. For safer and more efficient work.The camera can be used together with the original Luda Farm Powerbank (S.129833), a solid rechargeable battery with a very strong magnet. This allows you to move and place the camera where it captures the best video for you on your vehicle or machine.The monitor on MachineCam HD is improved with higher resolution, greater clarity + 25% (for sunny days) and the new image format, true 16: 9, that shows the image exactly as it looks in reality.The camera system delivers high definition video in all light conditions. In the dark, the camera's high-powered IR-system lights up approx. 15 meters in front of the camera.The MachineCam HD screen automatically connects up to 4 cameras and can automatically switch to the reverse-camera when reversing. With the split-screen feature, you can view 2 cameras simultaneously. If you want, you can also record your work. With MachineCam HD, you can use an SD card to easily record and document what you see on the monitor.Robust construction and built to last.Contains: 1 x 7 TFT-LCD Monitor 800 (RGB) x 720 Resolution (S.164681)1 x 1/3 CMOS Camera & Power Cable (Additional Camera Kit S.164681)1 x Removable sunvisor(S.164687)1 x Dual Suction Bracket (S.128975)1 x 3m 12V Cigarette plug for monitor (S.164684)1 x 3m Power cable for monitor (S.164685)1 x Manual
A truly wireless camera system with unique combination of battery and strong magnets that allows camera and battery to be moved quick and easy between different machinery.Use when harvesting, baling or reversing. All-you-need-in-a-box.3 years warranty.One camera system – many usage areas Night-vision, water-resistant (IP66)Battery time 20-26 hours
Get a free display stand when you buy the machine Cam Mobility bundleA truly wireless camera system with unique combination of battery and strong magnets that allows camera and battery to be moved quick and easy between different machinery.Use when harvesting, balingor reversing. All-you-need-in-a-box.3 years warranty.One camera system – many usage areas.Night-vision, water-resistant (IP66)Battery time 20-26 hours
A power bank that connects to your MachineCam, MachineCam HD, MachineCam Mobility, MachineCam MiniA powerful battery (22 000 mAh)Installation takes secondsWaterproof on-off switchRugged, water-resistant design (IP66)3-year warranty (online registration required)Included in the BoxPowerBank with on/off button and integrated magnetMagnet including screws and washers for the cameraCharger 100-240VAC in, 5V 600 mA out with four exchangeable plugs: EU, UK, US and ChinaQuick Install Guide and warranty document
12 & 24 VoltE Approved: yesWhen double engaged in reverse gear the alarm cuts out to conform with the restricted hours of use (11.30pm - 7.00am in the UK).Tough, durable and waterproof.Expoxy sealed against mud, water and vibration.Can be steam-cleaned and pressure-hosed.90dB at 1m.