Discrete hardware for installation into any vehiclePowered up with the ignitionBuilt in GPS10hz GPS receiver WAAS EGNOS GLONASSBuilt in Terrain CompensationBluetooth to Android tabletTablet charging point3D Guidance with straight and curved modesField area measurementField recognitionStore Farm / Fields BoundariesMulti language 12V Power Input5V Power Output (for charging display)
Discrete hardware for installation into any vehiclePowered up with the ignitionBuilt in GPS10hz GPS receiver WAAS EGNOS GLONASSBuilt in Terrain Compensation Bluetooth to Android tabletTablet charging point3D Guidance with straight and curved modesField area measurementField recognitionStore Farm / Fields Boundaries Multi language 12V Power Input5V Power Output (for charging display)Headland WarningHeadland guidancePause and resuming of JobsJob recordingAutomatic recording optionSynchronizing of data 3G or WifiTracking 3G or Wifi
Operators use dallas key-style fobs to disable the immobiliser and start the vehicle.Automatically immobilises ignition and starter motor 30 seconds after the ignition is turned Off.Supplied with two dallas keys.LED status indicator.Thatcham 2 approved.Should be installed by an accredited engineer to fulfil Thatcham approval.
Protects your vehicle against unauthorised useAfter its installation, the immobilizer is fully integrated and cannot be recognized by unauthorized personsThe electronic key makes use of contact-free transponder technologyThe transponder (sender and receiver unit)has its own battery-free power supply and is permanently integrated into the mechanical key of the start switchRecovery of a stolen vehicle leads to economic loss and long downtimes. An immobilizer can make theft more difficult.
A8510 Key ProgramingEnsure the immobiliser is disarmed :-1) Switch the ignition ON and OFF three times then back to the ON position within seven seconds.2) The LED on the dashboard will light up signaling the unit is in programming mode.3) Touch an already programmed key onto receptical, the LED will extinguish for one second4) Repeat step 3 for all other keys (Max of 4 touch keys)5) To exit programming switch off the ignition key (unit will automatically exit programming after four keys)NOTE :-1) Programing procedure can only entered with the system disarmed.2) If all keys have been lost the system will need to be replaced
Used to locate a vehicle on GSM phone with GPS coordinates. (Flight Hardware).Alert the user by SMS when the vehicle leaves the stored position.Small and unnoticed in the eyes of thieves.Water resistant limited Cost (Cost of SMS only) Connects to mobile phone users.Battery powered long time of the vehicle battery.Many functions and settings available to suit the needs of usersInsert Pay As You Go SIM and use internetmaps to monitor propertyTracker will text you latitude and longitudeSend alerts when your property leaves a preset areaOverspeed alertLow battery and low GPS signal alerts
