Forged alloy steel - Quenched and TemperedIndividually Proof Tested to 2 1/2 times the Working Load Limit with certification Each hook has a Product Identification Code (PIC) for material traceability ,along with the size and the name CrosbySuitable for use with Grade 100 and Grade 80 chainFatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles''Look for the Platinum Colour - Crosby Grade 100 Alloy Products.'' Hook can be tip loaded at the reduced Working Load Limit. Operator must ensure the load is retained properly in the hook.
Forged alloy steel - Quenched and TemperedIndividually Proof Tested to 2 1/2 times the Working Load Limit with certification Each hook has a Product Identification Code (PIC) for material traceability ,along with the size and the name CrosbySuitable for use with Grade 100 and Grade 80 chainFatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles''Look for the Platinum Colour - Crosby Grade 100 Alloy Products.'' Hook can be tip loaded at the reduced Working Load Limit. Operator must ensure the load is retained properly in the hook.
Forged alloy steel - Quenched and TemperedIndividually Proof Tested to 2 1/2 times the Working Load Limit with certification Each hook has a Product Identification Code (PIC) for material traceability ,along with the size and the name CrosbySuitable for use with Grade 100 and Grade 80 chainFatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles''Look for the Platinum Colour - Crosby Grade 100 Alloy Products.'' Hook can be tip loaded at the reduced Working Load Limit. Operator must ensure the load is retained properly in the hook.
Clevis shortening hook. No reduction of working load limit, thanks to supporting cradle lugs on either side of hook to prevent chain link deformation. Fulfills requirements in: EN 1677:2008 (WLL +25%), ASTM A952/A952M-02 and AS 3776:2015.
Clevis shortening hook. No reduction of working load limit, thanks to supporting cradle lugs on either side of hook to prevent chain link deformation. Fulfills requirements in: EN 1677:2008 (WLL +25%), ASTM A952/A952M-02 and AS 3776:2015.
Not for use with Berglok. No reduction of working load limit, thanks to supporting lugs on either side of hook to prevent chain link deformation. Fulfills requirements in: EN 1677:2008, ISO 8539:2009, ASTM A952/A952M-02 and AS 3776:2015.
Not for use with Berglok. No reduction of working load limit, thanks to supporting lugs on either side of hook to prevent chain link deformation. Fulfills requirements in: EN 1677:2008, ISO 8539:2009, ASTM A952/A952M-02 and AS 3776:2015.
