This product is restricted to mainland UK delivery only and is not available to Northern IrelandKoldgard 50/50 is a premixed and ready-to-use engine coolant (antifreeze), protects all engines to -37ºC. Monoethylene glycol based, contains no nitrates, amines, phosphates, borax, silicates and no other mineral additives, suitable for both petrol and diesel engines. Increased life-time, allowing frequent maintenance, thanks to corrosion inhibitors which are little consumed in the time.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandKoldgard 50/50 is a premixed and ready-to-use engine coolant (antifreeze), protects all engines to -37ºC. Monoethylene glycol based, contains no nitrates, amines, phosphates, borax, silicates and no other mineral additives, suitable for both petrol and diesel engines. Increased life-time, allowing frequent maintenance, thanks to corrosion inhibitors which are little consumed in the time.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandKoldgard 50/50 is a premixed and ready-to-use engine coolant (antifreeze), protects all engines to -37ºC. Monoethylene glycol based, contains no nitrates, amines, phosphates, borax, silicates and no other mineral additives, suitable for both petrol and diesel engines. Increased life-time, allowing frequent maintenance, thanks to corrosion inhibitors which are little consumed in the time.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandSparex Sparguard - mixed with the appropriate amount of water – is used as a cooling and heat transferring fluid in combustion engines and in particular for heavy duty applications. Is a phosphate-free ethylene glycol coolant based on low silicate technology in combination with nitrite and molybdate. Specially designed for heavy-duty engine coolants and may be used with confidence in engines manufactured from cast iron, aluminium or combinations of the two metals and in cooling systems made of aluminium or copper alloys. Suitable for gasoline, diesel and natural gas powered automotive and industrial engines and is particularly recommended for heavy duty engines where high temperature aluminium protection is important.Benefits:Effective corrosion protection optimized inhibitor packageExcellent pitting protection for wet sleeve cylinder linersAluminium protection high performance additivesUniform and homogenous protective layer engineered low-silicate inhibitor packageNo gel formation or drop out performing silicate stabilizerNo scale formation phosphate free inhibitor packageCompatible with most other coolants based on ethylene glycol. Exclusive use is however recommended for optimum corrosion protection and inhibitor stability. This coolant is compatible with most European hard tap waters. However, for optimal performance and controlled quality, we recommend the use of deionized or distilled water to prepare the ready-to-use dilutions. We refer to our product information leaflet on water quality recommendations.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandSparex Sparguard - mixed with the appropriate amount of water – is used as a cooling and heat transferring fluid in combustion engines and in particular for heavy duty applications. Is a phosphate-free ethylene glycol coolant based on low silicate technology in combination with nitrite and molybdate. Specially designed for heavy-duty engine coolants and may be used with confidence in engines manufactured from cast iron, aluminium or combinations of the two metals and in cooling systems made of aluminium or copper alloys. Suitable for gasoline, diesel and natural gas powered automotive and industrial engines and is particularly recommended for heavy duty engines where high temperature aluminium protection is important.Benefits:Effective corrosion protection optimized inhibitor packageExcellent pitting protection for wet sleeve cylinder linersAluminium protection high performance additivesUniform and homogenous protective layer engineered low-silicate inhibitor packageNo gel formation or drop out performing silicate stabilizerNo scale formation phosphate free inhibitor packageCompatible with most other coolants based on ethylene glycol. Exclusive use is however recommended for optimum corrosion protection and inhibitor stability. This coolant is compatible with most European hard tap waters. However, for optimal performance and controlled quality, we recommend the use of deionized or distilled water to prepare the ready-to-use dilutions. We refer to our product information leaflet on water quality recommendations.Direct Ship Item
This product is restricted to mainland UK delivery only and is not available to Northern IrelandSparex Sparguard - mixed with the appropriate amount of water – is used as a cooling and heat transferring fluid in combustion engines and in particular for heavy duty applications. Is a phosphate-free ethylene glycol coolant based on low silicate technology in combination with nitrite and molybdate. Specially designed for heavy-duty engine coolants and may be used with confidence in engines manufactured from cast iron, aluminium or combinations of the two metals and in cooling systems made of aluminium or copper alloys. Suitable for gasoline, diesel and natural gas powered automotive and industrial engines and is particularly recommended for heavy duty engines where high temperature aluminium protection is important.Benefits:Effective corrosion protection optimized inhibitor packageExcellent pitting protection for wet sleeve cylinder linersAluminium protection high performance additivesUniform and homogenous protective layer engineered low-silicate inhibitor packageNo gel formation or drop out performing silicate stabilizerNo scale formation phosphate free inhibitor packageCompatible with most other coolants based on ethylene glycol. Exclusive use is however recommended for optimum corrosion protection and inhibitor stability. This coolant is compatible with most European hard tap waters. However, for optimal performance and controlled quality, we recommend the use of deionized or distilled water to prepare the ready-to-use dilutions. We refer to our product information leaflet on water quality recommendations.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandUniversal Antifreeze will protect all engines up to -45°C. Ethylene Glycol based, blended with inhibitors to give high degree of corrosion & rust protection to all parts of engine cooling systems. Recommended for all year round use. Based on silicate and nitrate inhibitor technology, it is a nitrite, amine and phosphate free MEG based antifreeze and summer coolant that provides maintenance free protection against freezing and boiling but also gives excellent corrosion protection in cooling systems when mixed with the appropriate amount of water. Often used in older vehicles or applications where a modern long-life coolant is not required. Provides a high level of cost effective protection to cooling systems.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandUniversal Antifreeze will protect all engines up to -45°C. Ethylene Glycol based, blended with inhibitors to give high degree of corrosion & rust protection to all parts of engine cooling systems. Recommended for all year round use. Based on silicate and nitrate inhibitor technology, it is a nitrite, amine and phosphate free MEG based antifreeze and summer coolant that provides maintenance free protection against freezing and boiling but also gives excellent corrosion protection in cooling systems when mixed with the appropriate amount of water. Often used in older vehicles or applications where a modern long-life coolant is not required. Provides a high level of cost effective protection to cooling systems.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandUniversal Antifreeze will protect all engines up to -45°C. Ethylene Glycol based, blended with inhibitors to give high degree of corrosion & rust protection to all parts of engine cooling systems. Recommended for all year round use. Based on silicate and nitrate inhibitor technology, it is a nitrite, amine and phosphate free MEG based antifreeze and summer coolant that provides maintenance free protection against freezing and boiling but also gives excellent corrosion protection in cooling systems when mixed with the appropriate amount of water. Often used in older vehicles or applications where a modern long-life coolant is not required. Provides a high level of cost effective protection to cooling systems.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandFor Morris lubricant products, a minimum order quantity (MOQ) of 200 litres is required. Orders placed below this minimum may result in non‑shipment or additional freight charges. These can be mixed product types, provided the total order meets the minimum of 200 litres.If you need further information or assistance, please contact Customer Care or your Area Sales Manager (ASM).MEG antifreeze will protect engines from frost damage right down to –40oC, whilst providing outstanding protection against rust and corrosion for all parts of the cooling system. This mono ethylene glycol (MEG) based antifreeze meets the technical requirements of BS6580:2010 and is recommended for all year round use. Features: • Does not allow rust or corrosion to take place with cast iron, aluminium, copper alloys, solder, or any other metals found in the engine cooling system and therefore prolongs the life of the block, cylinder liners, radiator, pump and heater system. • Does not form sediment, precipitate additives or form gels. • No adverse effects on rubber hoses or gasket materials and will not cause leaks. • Last for up to two years in service, when a 50% solution is maintained. • Does not form harmful foam inside the system. • Compatible with all good quality ethylene glycol antifreezes of this type. • Nitrite, amine and phosphate (NAP) free. • Includes borate and silicate. Applications: Suitable for most engine cooling systems found in cars, vans, trucks, agricultural equipment and contractor’s plant. NOTE: Always check the manufacturer’s handbook or seek technical advice in case an alternative antifreeze type is required.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandFor Morris lubricant products, a minimum order quantity (MOQ) of 200 litres is required. Orders placed below this minimum may result in non‑shipment or additional freight charges. These can be mixed product types, provided the total order meets the minimum of 200 litres.If you need further information or assistance, please contact Customer Care or your Area Sales Manager (ASM).MEG antifreeze will protect engines from frost damage right down to –40oC, whilst providing outstanding protection against rust and corrosion for all parts of the cooling system. This mono ethylene glycol (MEG) based antifreeze meets the technical requirements of BS6580:2010 and is recommended for all year round use. Features: • Does not allow rust or corrosion to take place with cast iron, aluminium, copper alloys, solder, or any other metals found in the engine cooling system and therefore prolongs the life of the block, cylinder liners, radiator, pump and heater system. • Does not form sediment, precipitate additives or form gels. • No adverse effects on rubber hoses or gasket materials and will not cause leaks. • Last for up to two years in service, when a 50% solution is maintained. • Does not form harmful foam inside the system. • Compatible with all good quality ethylene glycol antifreezes of this type. • Nitrite, amine and phosphate (NAP) free. • Includes borate and silicate. Applications: Suitable for most engine cooling systems found in cars, vans, trucks, agricultural equipment and contractor’s plant. NOTE: Always check the manufacturer’s handbook or seek technical advice in case an alternative antifreeze type is required.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandFor Morris lubricant products, a minimum order quantity (MOQ) of 200 litres is required. Orders placed below this minimum may result in non‑shipment or additional freight charges. These can be mixed product types, provided the total order meets the minimum of 200 litres.If you need further information or assistance, please contact Customer Care or your Area Sales Manager (ASM).MEG antifreeze will protect engines from frost damage right down to –40oC, whilst providing outstanding protection against rust and corrosion for all parts of the cooling system. This mono ethylene glycol (MEG) based antifreeze meets the technical requirements of BS6580:2010 and is recommended for all year round use. Features: • Does not allow rust or corrosion to take place with cast iron, aluminium, copper alloys, solder, or any other metals found in the engine cooling system and therefore prolongs the life of the block, cylinder liners, radiator, pump and heater system. • Does not form sediment, precipitate additives or form gels. • No adverse effects on rubber hoses or gasket materials and will not cause leaks. • Last for up to two years in service, when a 50% solution is maintained. • Does not form harmful foam inside the system. • Compatible with all good quality ethylene glycol antifreezes of this type. • Nitrite, amine and phosphate (NAP) free. • Includes borate and silicate. Applications: Suitable for most engine cooling systems found in cars, vans, trucks, agricultural equipment and contractor’s plant. NOTE: Always check the manufacturer’s handbook or seek technical advice in case an alternative antifreeze type is required.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandFor Morris lubricant products, a minimum order quantity (MOQ) of 200 litres is required. Orders placed below this minimum may result in non‑shipment or additional freight charges. These can be mixed product types, provided the total order meets the minimum of 200 litres.If you need further information or assistance, please contact Customer Care or your Area Sales Manager (ASM).MEG antifreeze will protect engines from frost damage right down to –40oC, whilst providing outstanding protection against rust and corrosion for all parts of the cooling system. This mono ethylene glycol (MEG) based antifreeze meets the technical requirements of BS6580:2010 and is recommended for all year round use. Features: • Does not allow rust or corrosion to take place with cast iron, aluminium, copper alloys, solder, or any other metals found in the engine cooling system and therefore prolongs the life of the block, cylinder liners, radiator, pump and heater system. • Does not form sediment, precipitate additives or form gels. • No adverse effects on rubber hoses or gasket materials and will not cause leaks. • Last for up to two years in service, when a 50% solution is maintained. • Does not form harmful foam inside the system. • Compatible with all good quality ethylene glycol antifreezes of this type. • Nitrite, amine and phosphate (NAP) free. • Includes borate and silicate. Applications: Suitable for most engine cooling systems found in cars, vans, trucks, agricultural equipment and contractor’s plant. NOTE: Always check the manufacturer’s handbook or seek technical advice in case an alternative antifreeze type is required.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandFor Morris lubricant products, a minimum order quantity (MOQ) of 200 litres is required. Orders placed below this minimum may result in non‑shipment or additional freight charges. These can be mixed product types, provided the total order meets the minimum of 200 litres.If you need further information or assistance, please contact Customer Care or your Area Sales Manager (ASM).MEG antifreeze will protect engines from frost damage right down to –40oC, whilst providing outstanding protection against rust and corrosion for all parts of the cooling system. This mono ethylene glycol (MEG) based antifreeze meets the technical requirements of BS6580:2010 and is recommended for all year round use. Features: • Does not allow rust or corrosion to take place with cast iron, aluminium, copper alloys, solder, or any other metals found in the engine cooling system and therefore prolongs the life of the block, cylinder liners, radiator, pump and heater system. • Does not form sediment, precipitate additives or form gels. • No adverse effects on rubber hoses or gasket materials and will not cause leaks. • Last for up to two years in service, when a 50% solution is maintained. • Does not form harmful foam inside the system. • Compatible with all good quality ethylene glycol antifreezes of this type. • Nitrite, amine and phosphate (NAP) free. • Includes borate and silicate. Applications: Suitable for most engine cooling systems found in cars, vans, trucks, agricultural equipment and contractor’s plant. NOTE: Always check the manufacturer’s handbook or seek technical advice in case an alternative antifreeze type is required.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandFor Morris lubricant products, a minimum order quantity (MOQ) of 200 litres is required. Orders placed below this minimum may result in non‑shipment or additional freight charges. These can be mixed product types, provided the total order meets the minimum of 200 litres.If you need further information or assistance, please contact Customer Care or your Area Sales Manager (ASM).Ultralife 4 is a heavy duty, versatile antifreeze/coolant that provides long-life corrosion protection for all engine metals, including aluminium and ferrous alloys. The coolant has been field tested and has proven to provide the following periods of protection: • 650,000 km (ca. 8,000 hours) in truck & bus-application or • 250,000 km (ca. 2,000 hours) for passenger cars or • 32,000 hours (or 6 years) for stationary engines. It is recommended to change the coolant every five years or when above mileages or operating times are reached, whichever comes first. Ultralife 4 provides long-life protection against all forms of corrosion by the use of optimised and patented organic corrosion inhibitors. This product does not contain nitrates, nitrites, amines, borates or silicates. Excellent and lasting high temperature corrosion protection is provided for the aluminium heat transfer surfaces contained in modern engines. Furthermore, Ultralife 4 offers excellent cavitation protection. Features and Benefits: • Extended life • Improved heat transfer • Reduces repairs to thermostat, radiator and water pump • Improved hard water stability, absence of silicates and phosphates • Save time and money maintenance-free coolant • Suitable for mixed fleets, one coolant for automotive and heavy duty applications • Environmentally friendly by using carboxylic additives Applications: Ultralife 4 may be used with confidence in engines manufactured from cast iron, aluminium or combinations of the two metals, and in cooling systems made of aluminium or copper alloys.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandFor Morris lubricant products, a minimum order quantity (MOQ) of 200 litres is required. Orders placed below this minimum may result in non‑shipment or additional freight charges. These can be mixed product types, provided the total order meets the minimum of 200 litres.If you need further information or assistance, please contact Customer Care or your Area Sales Manager (ASM).Ultralife 4 is a heavy duty, versatile antifreeze/coolant that provides long-life corrosion protection for all engine metals, including aluminium and ferrous alloys. The coolant has been field tested and has proven to provide the following periods of protection: • 650,000 km (ca. 8,000 hours) in truck & bus-application or • 250,000 km (ca. 2,000 hours) for passenger cars or • 32,000 hours (or 6 years) for stationary engines. It is recommended to change the coolant every five years or when above mileages or operating times are reached, whichever comes first. Ultralife 4 provides long-life protection against all forms of corrosion by the use of optimised and patented organic corrosion inhibitors. This product does not contain nitrates, nitrites, amines, borates or silicates. Excellent and lasting high temperature corrosion protection is provided for the aluminium heat transfer surfaces contained in modern engines. Furthermore, Ultralife 4 offers excellent cavitation protection. Features and Benefits: • Extended life • Improved heat transfer • Reduces repairs to thermostat, radiator and water pump • Improved hard water stability, absence of silicates and phosphates • Save time and money maintenance-free coolant • Suitable for mixed fleets, one coolant for automotive and heavy duty applications • Environmentally friendly by using carboxylic additives Applications: Ultralife 4 may be used with confidence in engines manufactured from cast iron, aluminium or combinations of the two metals, and in cooling systems made of aluminium or copper alloys.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandFor Morris lubricant products, a minimum order quantity (MOQ) of 200 litres is required. Orders placed below this minimum may result in non‑shipment or additional freight charges. These can be mixed product types, provided the total order meets the minimum of 200 litres.If you need further information or assistance, please contact Customer Care or your Area Sales Manager (ASM).Ultralife 4 is a heavy duty, versatile antifreeze/coolant that provides long-life corrosion protection for all engine metals, including aluminium and ferrous alloys. The coolant has been field tested and has proven to provide the following periods of protection: • 650,000 km (ca. 8,000 hours) in truck & bus-application or • 250,000 km (ca. 2,000 hours) for passenger cars or • 32,000 hours (or 6 years) for stationary engines. It is recommended to change the coolant every five years or when above mileages or operating times are reached, whichever comes first. Ultralife 4 provides long-life protection against all forms of corrosion by the use of optimised and patented organic corrosion inhibitors. This product does not contain nitrates, nitrites, amines, borates or silicates. Excellent and lasting high temperature corrosion protection is provided for the aluminium heat transfer surfaces contained in modern engines. Furthermore, Ultralife 4 offers excellent cavitation protection. Features and Benefits: • Extended life • Improved heat transfer • Reduces repairs to thermostat, radiator and water pump • Improved hard water stability, absence of silicates and phosphates • Save time and money maintenance-free coolant • Suitable for mixed fleets, one coolant for automotive and heavy duty applications • Environmentally friendly by using carboxylic additives Applications: Ultralife 4 may be used with confidence in engines manufactured from cast iron, aluminium or combinations of the two metals, and in cooling systems made of aluminium or copper alloys.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandFor Morris lubricant products, a minimum order quantity (MOQ) of 200 litres is required. Orders placed below this minimum may result in non‑shipment or additional freight charges. These can be mixed product types, provided the total order meets the minimum of 200 litres.If you need further information or assistance, please contact Customer Care or your Area Sales Manager (ASM).Ultralife Red will protect all engines from frost damage right down to –38oC. It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use. This Ethylene Glycol based antifreeze, which uses Organic Acid Technology, is free from nitrites, amines, phosphates, borates and silicates. It is also 2-ethyhexanoic acid free. When used at the correct concentration, coolants based on Organic Acid Technology are capable of providing extended operation compared to conventional antifreeze. This can be for up to 5 years or 250,000km in passenger cars and 500,000km in commercial vehicles, depending which is reached first. Applications: Ultralife Red is suitable for the cooling systems of modern engines in cars, vans, trucks and contractors plant, where an OAT antifreeze is recommended.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandFor Morris lubricant products, a minimum order quantity (MOQ) of 200 litres is required. Orders placed below this minimum may result in non‑shipment or additional freight charges. These can be mixed product types, provided the total order meets the minimum of 200 litres.If you need further information or assistance, please contact Customer Care or your Area Sales Manager (ASM).Ultralife Red will protect all engines from frost damage right down to –38oC. It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use. This Ethylene Glycol based antifreeze, which uses Organic Acid Technology, is free from nitrites, amines, phosphates, borates and silicates. It is also 2-ethyhexanoic acid free. When used at the correct concentration, coolants based on Organic Acid Technology are capable of providing extended operation compared to conventional antifreeze. This can be for up to 5 years or 250,000km in passenger cars and 500,000km in commercial vehicles, depending which is reached first. Applications: Ultralife Red is suitable for the cooling systems of modern engines in cars, vans, trucks and contractors plant, where an OAT antifreeze is recommended.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandFor Morris lubricant products, a minimum order quantity (MOQ) of 200 litres is required. Orders placed below this minimum may result in non‑shipment or additional freight charges. These can be mixed product types, provided the total order meets the minimum of 200 litres.If you need further information or assistance, please contact Customer Care or your Area Sales Manager (ASM).Ultralife Red will protect all engines from frost damage right down to –38oC. It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use. This Ethylene Glycol based antifreeze, which uses Organic Acid Technology, is free from nitrites, amines, phosphates, borates and silicates. It is also 2-ethyhexanoic acid free. When used at the correct concentration, coolants based on Organic Acid Technology are capable of providing extended operation compared to conventional antifreeze. This can be for up to 5 years or 250,000km in passenger cars and 500,000km in commercial vehicles, depending which is reached first. Applications: Ultralife Red is suitable for the cooling systems of modern engines in cars, vans, trucks and contractors plant, where an OAT antifreeze is recommended.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandFor Morris lubricant products, a minimum order quantity (MOQ) of 200 litres is required. Orders placed below this minimum may result in non‑shipment or additional freight charges. These can be mixed product types, provided the total order meets the minimum of 200 litres.If you need further information or assistance, please contact Customer Care or your Area Sales Manager (ASM).Ultralife Red will protect all engines from frost damage right down to –38oC. It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use. This Ethylene Glycol based antifreeze, which uses Organic Acid Technology, is free from nitrites, amines, phosphates, borates and silicates. It is also 2-ethyhexanoic acid free. When used at the correct concentration, coolants based on Organic Acid Technology are capable of providing extended operation compared to conventional antifreeze. This can be for up to 5 years or 250,000km in passenger cars and 500,000km in commercial vehicles, depending which is reached first. Applications: Ultralife Red is suitable for the cooling systems of modern engines in cars, vans, trucks and contractors plant, where an OAT antifreeze is recommended.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandFor Morris lubricant products, a minimum order quantity (MOQ) of 200 litres is required. Orders placed below this minimum may result in non‑shipment or additional freight charges. These can be mixed product types, provided the total order meets the minimum of 200 litres.If you need further information or assistance, please contact Customer Care or your Area Sales Manager (ASM).Ultralife Red will protect all engines from frost damage right down to –38oC. It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use. This Ethylene Glycol based antifreeze, which uses Organic Acid Technology, is free from nitrites, amines, phosphates, borates and silicates. It is also 2-ethyhexanoic acid free. When used at the correct concentration, coolants based on Organic Acid Technology are capable of providing extended operation compared to conventional antifreeze. This can be for up to 5 years or 250,000km in passenger cars and 500,000km in commercial vehicles, depending which is reached first. Applications: Ultralife Red is suitable for the cooling systems of modern engines in cars, vans, trucks and contractors plant, where an OAT antifreeze is recommended.
