Bondloc B222 is a low strength threadlocker suitable for all threaded assemblies, particularly good for small fasteners and set screws.Designed for easy disassembly with hand tools, helps minimise and reduces loosening through vibrating assemblies.Ideal for low strength threadlocking on fragile alloys that could fracture during disassembly.Colour: PurpleViscosity: 900 - 1,500 cpsBreakaway Strength:Less than 6Nm (ISO 10964)Prevail Torque: 4NmCure Speed:Less than 15mins @ 20°C with activatorFull Cure Time: 12 hours @ 20°CMin Max Temp: -55°C - +150°C
Bondloc B222 is a low strength threadlocker suitable for all threaded assemblies, particularly good for small fasteners and set screws.Designed for easy disassembly with hand tools, helps minimise and reduces loosening through vibrating assemblies.Ideal for low strength threadlocking on fragile alloys that could fracture during disassembly.Colour: PurpleViscosity: 900 - 1,500 cpsBreakaway Strength:Less than 6Nm (ISO 10964)Prevail Torque: 4NmCure Speed:Less than 15mins @ 20°C with activatorFull Cure Time: 12 hours @ 20°CMin Max Temp: -55°C - +150°C
Bondloc B243 is a medium strength, oil tolerant threadlocker designed for direct application onto ''as received parts'' where an oily film exists or where contamination is a problem.This product works on passive substrates like plated surfaces and stainless steel as well as active metals like brass and copper.Suitable for use with Diesel and Petrol.Colour: BlueViscosity: 2,500 - 3,000cpsBreakaway Strength on Steel:
Bondloc B243 is a medium strength, oil tolerant threadlocker designed for direct application onto ''as received parts'' where an oily film exists or where contamination is a problem.This product works on passive substrates like plated surfaces and stainless steel as well as active metals like brass and copper.Suitable for use with Diesel and Petrol.Colour: BlueViscosity: 2,500 - 3,000cpsBreakaway Strength on Steel:
Bondloc B270 is a high strength threadlocker which prevents loosening against vibration when sealing of bolts, nuts and studs.Colour: GreenViscosity: 400 - 600cpsBreakaway Strength on Steel: Greater Than 33Nm (ISO 10964)Prevail Torque: 39NmCure speed: 10 minsFull Cure Time: 12 hoursMin Max Temp: -55°C - +180°C
Bondloc B270 is a high strength threadlocker which prevents loosening against vibration when sealing of bolts, nuts and studs.Colour: GreenViscosity: 400 - 600cpsBreakaway Strength on Steel: Greater Than 33Nm (ISO 10964)Prevail Torque: 39NmCure speed: 10 minsFull Cure Time: 12 hoursMin Max Temp: -55°C - +180°C
Bondloc B275 is high strength, high viscosity, thixotropic threadlocker that prevents loosening against vibration when used on various types of threads
Threadlocking Adhesive - low strength. Easy disassembly. Suitable for all metal threaded assemblies.LOCTITE® 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screwsPrevents loosening on vibrating assemblies, e.g. pumps, gear boxes or pressesEspecially suited to small thread sizesPermits disassembly with hand toolsP1 NSF Reg. No.: 123002
LOCTITE® 243 is a medium strength blue threadlocking adhesive that seals and secures metal nuts and bolts to prevent loosening due to shock and vibration.LOCTITE® 243 is a general purpose threadlocker that provides a medium strength bond. LOCTITE® 243 works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g., motor oils, corrosion prevention oils and cutting fluid.Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or pressesWorks on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluidsPermits disassembly with hand tools for servicingP1 NSF Reg. No.: 123000
LOCTITE® 243 is a medium strength blue threadlocking adhesive that seals and secures metal nuts and bolts to prevent loosening due to shock and vibration.LOCTITE® 243 is a general purpose threadlocker that provides a medium strength bond. LOCTITE® 243 works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g., motor oils, corrosion prevention oils and cutting fluid.Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or pressesWorks on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluidsPermits disassembly with hand tools for servicingP1 NSF Reg. No.: 123000
Threadlocking Adhesive - high strength. Permanent locking. Suitable for all metal threaded assemblies.LOCTITE® 270 is a high-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids. Can be disassembled by heating to 300°C.High-strength general threadlocker for maximum efficacyPrevents loosening on vibrating assemblies, e.g. pumps, gear boxes or pressesProven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluidsWorks on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)Permits disassembly with hand toolsP1 NSF Reg. No.: 123006Can be disassembled by heating to 300°C
Threadlocking Adhesive - high strength. Permanent locking. Suitable for all metal threaded assemblies.LOCTITE® 270 is a high-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids. Can be disassembled by heating to 300°C.High-strength general threadlocker for maximum efficacyPrevents loosening on vibrating assemblies, e.g. pumps, gear boxes or pressesProven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluidsWorks on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)Permits disassembly with hand toolsP1 NSF Reg. No.: 123006Can be disassembled by heating to 300°C
High strength, low viscosity, green, methacrylate-based threadlocking adhesive which fluoresces under UV light to allow monitoring.LOCTITE® 2701 is a green, low viscosity, methacrylate-based threadlocking adhesive with high strength, especially for chromated surfaces. Steel fixture time of 10 min, brass 4 min and stainless steel 25 min. Tolerates slight contaminations of industrial oils. Suitable for all metal fasteners. Fluoresces under UV light.Low viscosityFluoresces to allow quality control and inspectionHigh strength, especially for chromated surfacesPrevents unwanted movement, loosening, leaks and corrosionResists vibrationSeals threads - allows through-hole tapping
High strength, low viscosity, green, methacrylate-based threadlocking adhesive which fluoresces under UV light to allow monitoring.LOCTITE® 2701 is a green, low viscosity, methacrylate-based threadlocking adhesive with high strength, especially for chromated surfaces. Steel fixture time of 10 min, brass 4 min and stainless steel 25 min. Tolerates slight contaminations of industrial oils. Suitable for all metal fasteners. Fluoresces under UV light.Low viscosityFluoresces to allow quality control and inspectionHigh strength, especially for chromated surfacesPrevents unwanted movement, loosening, leaks and corrosionResists vibrationSeals threads - allows through-hole tapping
LOCTITE® 290 is a mediumhigh strength, wicking grade threadlocking adhesive that is ideal for locking preassembled fasteners.LOCTITE® 290 is a liquid medium to high-strength threadlocker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The product can also fill porosities in welds, castings and powdered metal parts.Works on metal onlyIdeal for locking preassembled fasteners, e.g. instrumentation fasteners, electrical connectors and set screwsProven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluidsRequires heat for disassembly
LOCTITE® 290 is a mediumhigh strength, wicking grade threadlocking adhesive that is ideal for locking preassembled fasteners.LOCTITE® 290 is a liquid medium to high-strength threadlocker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The product can also fill porosities in welds, castings and powdered metal parts.Works on metal onlyIdeal for locking preassembled fasteners, e.g. instrumentation fasteners, electrical connectors and set screwsProven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluidsRequires heat for disassembly
LOCTITE® 290 is a mediumhigh strength, wicking grade threadlocking adhesive that is ideal for locking preassembled fasteners.LOCTITE® 290 is a liquid medium to high-strength threadlocker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The product can also fill porosities in welds, castings and powdered metal parts.Works on metal onlyIdeal for locking preassembled fasteners, e.g. instrumentation fasteners, electrical connectors and set screwsProven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluidsRequires heat for disassembly
LOCTITE® 638 is a high strength, fast curing, general purpose retaining compound.LOCTITE® 638 is designed for the bonding of cylindrical fitting parts, particularly with narrow bond gaps approaching 0.25 mm. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It not only works on active metals but also on passive substrates, exhibiting robust cure performance. The product offers high-temperature performance and good oil tolerance, and tolerates minor surface contaminants.Tolerates minor contaminants, including industrial oilsHigh strength on all metals, including passive substrates (e.g. stainless steel)High temperature resistanceIdeal for shafts, gears, pulleys and similar cylindrical partsDVGW Approval (EN 751-1): NG-5146AR0619P1 NSF Reg. No.: 123010WRAS Approval (BS 6920): 0511518