This product is restricted to mainland UK delivery only and is not available to Northern IrelandFor Morris lubricant products, a minimum order quantity (MOQ) of 200 litres is required. Orders placed below this minimum may result in non‑shipment or additional freight charges. These can be mixed product types, provided the total order meets the minimum of 200 litres.If you need further information or assistance, please contact Customer Care or your Area Sales Manager (ASM).Anti-Seize is a lead and CFC free compound, made from solvent refined oil, Bentonite thickener and fine copper powder. The product is highly recommended as a thread lubricant on the external parts of all racing motorcycles, where rapid and trouble free disassembly by pit crews is a competitive essential. Features: • Prevents seizure and galling during assembly and therefore reduces assembly time. • Enables the easy dismantling of components subjected to high temperatures. • Provides an effect anti-seize in saturated conditions, including chemical environments and salt water. • Enables fast and easy dismantling of components, allowing them to be reused after dismantling. Applications: The special anti-seize properties enable this grease to work even if the joints become so compressed that most of the compound is squeezed out, or searing exhaust temperatures flash off the oily part of the compound. A fine film of copper particles always remain in joints or threads to prevent seizure. In the case of threaded joints where the compound has been applied before mating, these can easily be broken again even after long periods of use. Anti-Seize Compound will also prevent seizures of pins or shackles exposed to harsh conditions, where limited movement and long idle periods are a problem for ordinary lubrication. It is highly resistant to water washing and protects against rust and corrosion. Anti-Seize Compound can be used with confidence on the stud threads of manifolds and pipes that carry very hot and corrosive exhaust gases, where it assists sealing and allows trouble free disassembly in the future.
Holts Copper Grease has been developed to work at high temperatures, to prevent parts from seizing, making it ideal for use on vehicles and in trade applications.It protects against corrosion and can also be used between callipers and brake pads to prevent squeal.Protects against corrosion, preventing seized partsHigh performance non-melt lubricating greaseOperating temperatures: -100°C – +1100°CPrevents brake disc squealHolts Copper Grease can be used to stop seizing and prevent rust on areas such as wheel bolts, exhaust brackets, flanges and studs.
LOCTITE® LB 8008 C5-A is an exclusive anti-seize lubricant in a brush top form with copper and graphite suspended in high quality grease. It has an NLGI Grade of 0.LOCTITE® LB 8008 C5-A anti-seize lubricant paste is packaged in a brush top can, with copper and graphite suspended in a high quality grease. Applications include screws, nuts, pipes, exhaust bolts and brake caliper bolts. Resistant to extremely high temperatures (up to +980°C) and protects from rust, corrosion, galling and seizing. It has an NLGI Grade of 0.Resistant to very high temperatures up to +980°CUnique brush topIt has an NLGI grade of 0Protects from rust, corrosion, galling and seizingUsed for screws, nuts, pipes, exhaust bolts and brake calliper bolts
Lubricant - aluminium anti-seize spray. Heavy-duty and petroleum-based compound. High temperature resistance.LOCTITE® LB 8151 is a heavy-duty anti-seize spray designed to prevent joints from seizing and corroding when exposed to high temperatures such as encountered in the exhaust from combustion engines and in fittings for oil and gas burners. The product is typically used in applications with an operating temperature range of -30°C to +900°C.Heavy-duty, temperature resistant, petroleum-based lubricant compoundFortified with graphite and metallic flakesFor use in assemblies up to 900°CInert and will not evaporate or harden in extreme cold or heat
