WD-40 Degreaser - Industrial Grade (500ml Aerosol). Powerful solvent based formula to clean all types of oil, grease, dirt and grime in the workplace. Fast acting. Residue free and easy to rinse away.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandFor Morris lubricant products, a minimum order quantity (MOQ) of 200 litres is required. Orders placed below this minimum may result in non‑shipment or additional freight charges. These can be mixed product types, provided the total order meets the minimum of 200 litres.If you need further information or assistance, please contact Customer Care or your Area Sales Manager (ASM).A selected treatment designed to remove dirt, grime and accumulated oily deposits from carburetors and fuel injection systems. It can also be used with great effect to restore tune to carburetors in situ, or with only partial dismantling, if these have become blocked stuck or dirty. This makes Carb Cleaner is a vital part of any pit crew kit. Features: • Excellent solvency action to dissolve & remove dirt quickly • Dissolves gum, lacquer & deposits • Suitable for use on throttle valves & chokes • Improves engine efficiency Applications: When sprayed in to the air intake this product cleans all parts of the inlet system, carburetors, port areas and inlet valves. In these areas it is most effective in keeping vital parts moving, and passages clear of gums and deposits, so a smooth system air flow can be maintained. This is vital because even slight surface roughness from deposits can ruin tuning and cause power losses. Carb Cleaner can rejuvenate classic racing bikes by reducing deposit build up within carburetors, freeing sticking valves and cleaning the manifold and ports. This action can give lower emissions and improved performance in terms of increased power.
Fast loosening of extremely rusty thread connections.Product properties:Penetrates rust, dissolves ground-in dirt, oil, etc. efficiently.Really excellent penetration.Works fast thanks to extreme down cooling to -40°C.Fast penetration of active agents via microscopical fissures in corrosion layers.Lubricity on account of PTFE contents (Teflon)Silicone-free and acid-free.Does not solidify.
Holts Engine & Parts Degreaser can be used to safely clean and remove dirt, grease and oil from surfaces such as tools, machinery, vehicle parts, painted floors and paintbrushes.This professional grade spray works quickly to clean a range of metal and plastic surfaces.Its fast acting and powerful formula works to remove ingrained dirt and grease and rinses off easily.It even sprays upside down for difficult to reach places, making it ideal for use in a workshop or trade setting to ensure grease and dirt are removed from surfaces quickly, safely and without damage.Powerful solvent, quickly removes oil and greaseDegreases: metal, plastics and other hard surfacesMulti-purpose: suitable for a wide range of engines and machine partsRinses off easily
Parts Cleaner - general purpose. For use prior to bonding and sealing applications. Leaves no residue.LOCTITE® SF 7063 is our general-purpose product for cleaning and degreasing any kind of surface or machinery component before proceeding with a repair or assembly job involving LOCTITE® adhesives. It is a solvent-based cleaner and the product leaves no residue. LOCTITE® SF 7063 removes most greases, oils, lubrication fluids and metal cuttings.Solvent-based general parts cleanerIdeal for use prior to adhesive bonding and sealing applicationsRemoval of most greases, oils, lubrication fluids, metal cuttings and fines from all surfacesLeaves no residue
This product is restricted to mainland UK delivery only and is not available to Northern IrelandFor Morris lubricant products, a minimum order quantity (MOQ) of 200 litres is required. Orders placed below this minimum may result in non‑shipment or additional freight charges. These can be mixed product types, provided the total order meets the minimum of 200 litres.If you need further information or assistance, please contact Customer Care or your Area Sales Manager (ASM).MD4 is an effective, damp start and penetrating fluid with outstanding corrosion protection properties. When applied to wet parts the chemistry of MD4 has a powerful attraction to the underlying surfaces and this completely displaces traces of water. Therefore this product is particularly useful as an engine damp start. Using the aerosol version, a short spray on to the affected parts will displace any wetness and prevent voltage breakdown, allowing the engine to be started again normally. MD4 is also an effective penetrating fluid for freeing all seized and corroded metal parts. It has been designed with a very low surface tension, which gives it excellent penetrating power, and this, coupled with superior solvent and lubricating properties enables the most inaccessible corroded parts to be speedily dismantled. The residual oil film acts as a rust and corrosion preventative on the disassembled parts and helps reassembly. Applications: As a damp start, aerosol version. One short spray of 2-3 seconds on the plugs, leads, and distributor cap will displace moisture and allow starting. As a penetrating oil. Heavily corroded and seized parts should first be freed of scale, rust and paint by wire brushing. The parts should then be left to soak for as long as practical, and in severe cases, preferably overnight. Should be used whenever difficulties in dismantling due to rust, corrosion and seized parts are anticipated.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandFor Morris lubricant products, a minimum order quantity (MOQ) of 200 litres is required. Orders placed below this minimum may result in non‑shipment or additional freight charges. These can be mixed product types, provided the total order meets the minimum of 200 litres.If you need further information or assistance, please contact Customer Care or your Area Sales Manager (ASM).A complex mixture of hydrocarbon and oxygenated solvents designed to clean and degrease all flat and irregular surfaces. Solvent Cleaner is free from chlorinated and other ozone depleting solvents and is provided in aerosol form to provide an easy means of applying to surfaces, the powerful jet allowing easy purging of blind holes and crevices. After degreasing, the solvent evaporates rapidly leaving components chemically clean and free from oily and corrosive residues. The low temperature resulting from rapid evaporation may, in some instances, be used for shrink-fitting of small mechanical parts. Features: • Excellent degreasing properties • Rapid removal of dirt and debris • Chlorine free Applications: Particularly designed to remove all dirt and deposits from brake shoes and to evaporate leaving behind no residues. Also recommended for general degreasing applications in a workshop environment. Note: Due to the flammability of the product Solvent Cleaner is not recommended for use on electrical equipment, particularly where “sparking” may occur.
This product is restricted to mainland UK delivery only and is not available to Northern IrelandFor Morris lubricant products, a minimum order quantity (MOQ) of 200 litres is required. Orders placed below this minimum may result in non‑shipment or additional freight charges. These can be mixed product types, provided the total order meets the minimum of 200 litres.If you need further information or assistance, please contact Customer Care or your Area Sales Manager (ASM).Solvent Degreaser is a ready for use, pink coloured emulsifiable fluid, manufactured from a highly refined hydrocarbon solvent and a non-ionic surfactant. It was originally developed for rapid de-waxing of car bodies. The formulation acts by dissolving the wax or oil content and allowing them to be emulsified so that surfaces can then be washed clean with water. It has an extremely effective cleaning action on all surfaces even at low ambient temperature. Solvent Degreaser is also non-caustic and can be safely used on Aluminium and Magnesium alloys without fears of corrosion or corrosive residues on the surfaces. Solvent Degreaser has an added advantage over other products of this type in that the oil content in the water washings produced will quickly separate in an interceptor system allowing clean water to be discharged to sewer. Applications: Recommended for removal of the manufacturer’s protective coatings on cars, machine tools, and bright steel stocks. Also recommended for the de-waxing and degreasing of all factory and agricultural equipment where rapid oil separation at the interceptor is essential. Applications of Solvent Degreaser are always more effective if they can be allowed to soak into the dirt and surfaces for several hours, or even overnight before hosing off. Solvent Degreaser is easily applied by spraying, brush or dipping. Under no circumstances should this product, neat or diluted, be disposed of by putting into drains, soil or water courses.
