Capacities 1/3 through 150 metric tons.WLL and grade '6' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26Look for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/3 through 150 metric tons.WLL and grade '6' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26Look for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/3 through 150 metric tons.WLL and grade '6' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26Look for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/3 through 150 metric tons.WLL and grade '6' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26Look for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/3 through 150 metric tons.WLL and grade '6' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26Look for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/2 to 85 metric tons, grade 6Working Load Limit and grade '6' permanently shown on every shackleForged — Quenched and Tempered, with alloy pinsHot Dip galvanized or self coloured. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)Sizes 3/8'' and below are mechanically galvanizedFatigue rated (1/2t - 55t)Shackles 25t and larger are RFID EQUIPPEDApproved for use at -40° C (-40 degrees F) to 204° C (400° F)Meets or exceeds all requirements of ASME B30.26Sizes 1/2 - 25t meet the performance requirements of EN13889:2003Shackles 55 metric tons and smaller can be furnished proof tested with certificate to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of orderType Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance available. Certificates available when requested at time of order and may include additional chargesAll 2150 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg at -20° C (-4° F) upon special requestLook for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/2 to 85 metric tons, grade 6Working Load Limit and grade '6' permanently shown on every shackleForged — Quenched and Tempered, with alloy pinsHot Dip galvanized or self coloured. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)Sizes 3/8'' and below are mechanically galvanizedFatigue rated (1/2t - 55t)Shackles 25t and larger are RFID EQUIPPEDApproved for use at -40° C (-40 degrees F) to 204° C (400° F)Meets or exceeds all requirements of ASME B30.26Sizes 1/2 - 25t meet the performance requirements of EN13889:2003Shackles 55 metric tons and smaller can be furnished proof tested with certificate to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of orderType Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance available. Certificates available when requested at time of order and may include additional chargesAll 2150 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg at -20° C (-4° F) upon special requestLook for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/2 to 85 metric tons, grade 6Working Load Limit and grade '6' permanently shown on every shackleForged — Quenched and Tempered, with alloy pinsHot Dip galvanized or self coloured. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)Sizes 3/8'' and below are mechanically galvanizedFatigue rated (1/2t - 55t)Shackles 25t and larger are RFID EQUIPPEDApproved for use at -40° C (-40 degrees F) to 204° C (400° F)Meets or exceeds all requirements of ASME B30.26Sizes 1/2 - 25t meet the performance requirements of EN13889:2003Shackles 55 metric tons and smaller can be furnished proof tested with certificate to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of orderType Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance available. Certificates available when requested at time of order and may include additional chargesAll 2150 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg at -20° C (-4° F) upon special requestLook for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/2 to 85 metric tons, grade 6Working Load Limit and grade '6' permanently shown on every shackleForged — Quenched and Tempered, with alloy pinsHot Dip galvanized or self coloured. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)Sizes 3/8'' and below are mechanically galvanizedFatigue rated (1/2t - 55t)Shackles 25t and larger are RFID EQUIPPEDApproved for use at -40° C (-40 degrees F) to 204° C (400° F)Meets or exceeds all requirements of ASME B30.26Sizes 1/2 - 25t meet the performance requirements of EN13889:2003Shackles 55 metric tons and smaller can be furnished proof tested with certificate to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of orderType Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance available. Certificates available when requested at time of order and may include additional chargesAll 2150 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg at -20° C (-4° F) upon special requestLook for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/2 to 85 metric tons, grade 6Working Load Limit and grade '6' permanently shown on every shackleForged — Quenched and Tempered, with alloy pinsHot Dip galvanized or self coloured. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)Sizes 3/8'' and below are mechanically galvanizedFatigue rated (1/2t - 55t)Shackles 25t and larger are RFID EQUIPPEDApproved for use at -40° C (-40 degrees F) to 204° C (400° F)Meets or exceeds all requirements of ASME B30.26Sizes 1/2 - 25t meet the performance requirements of EN13889:2003Shackles 55 metric tons and smaller can be furnished proof tested with certificate to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of orderType Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance available. Certificates available when requested at time of order and may include additional chargesAll 2150 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg at -20° C (-4° F) upon special requestLook for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/2 to 85 metric tons, grade 6Working Load Limit and grade '6' permanently shown on every shackleForged — Quenched and Tempered, with alloy pinsHot Dip galvanized or self coloured. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)Sizes 3/8'' and below are mechanically galvanizedFatigue rated (1/2t - 55t)Shackles 25t and larger are RFID EQUIPPEDApproved for use at -40° C (-40 degrees F) to 204° C (400° F)Meets or exceeds all requirements of ASME B30.26Sizes 1/2 - 25t meet the performance requirements of EN13889:2003Shackles 55 metric tons and smaller can be furnished proof tested with certificate to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of orderType Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance available. Certificates available when requested at time of order and may include additional chargesAll 2150 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg at -20° C (-4° F) upon special requestLook for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/2 to 85 metric tons, grade 6Working Load Limit and grade '6' permanently shown on every shackleForged — Quenched and Tempered, with alloy pinsHot Dip galvanized or self coloured. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)Sizes 3/8'' and below are mechanically galvanizedFatigue rated (1/2t - 55t)Shackles 25t and larger are RFID EQUIPPEDApproved for use at -40° C (-40 degrees F) to 204° C (400° F)Meets or exceeds all requirements of ASME B30.26Sizes 1/2 - 25t meet the performance requirements of EN13889:2003Shackles 55 metric tons and smaller can be furnished proof tested with certificate to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of orderType Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance available. Certificates available when requested at time of order and may include additional chargesAll 2150 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg at -20° C (-4° F) upon special requestLook for the Red Pin® . . . the mark of genuine Crosby quality.