Bondloc B510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal parts.B510 has high temperature and chemical resistance and provides an instant low pressure seal.Typical applications include sealing rigid flange faces on transmissions and motor casings. Suitable for surface imperfections up to 0.25mm.Colour: PinkViscosity: 40,000 - 140,000cpsGap Fill: 0.25mmTensile Strength on Steel:
Bondloc B515 is a flexible, medium-strength gasketing anaerobic sealant that cures when confined in the absence of air between close-fitting metal parts.B515 is medium strength Industrial gasketing product and provides an instant low pressure seal on machined and rigid metal parts.Typical applications include pumps, thermostats, compressors, transmission housings and axle covers.Colour: PurpleViscosity: PasteGap Fill: 0.3mmTensile Strength on Steel : Less than 6Nmm2 (ISO 4587)Fixture Time: Less than 35 minsFull Cure Time: 12 hoursMin Max Temp: -55°C - +150°C
Bondloc B515 is a flexible, medium-strength gasketing anaerobic sealant that cures when confined in the absence of air between close-fitting metal parts.B515 is medium strength Industrial gasketing product and provides an instant low pressure seal on machined and rigid metal parts.Typical applications include pumps, thermostats, compressors, transmission housings and axle covers.Colour: PurpleViscosity: PasteGap Fill: 0.3mmTensile Strength on Steel : Less than 6Nmm2 (ISO 4587)Fixture Time: Less than 35 minsFull Cure Time: 12 hoursMin Max Temp: -55°C - +150°C
Bondloc B518 cures when air is excluded between close-fitting metal surfaces.B518 is a semi-flexible medium strength gasketing product recommended for use on rigid iron, stainless steel, aluminium, and steel flanged jointed surfaces.Fills gaps up to 0.25mm and is chemically resistant.Ideal for use on rigid metal faces and flanges i.e. pumps, motor housings and transmissions.Colour: RedViscosity: 200,000 - 800,000cpsGap Fill: 0.25mmTensile Strength on Steel: Greater Than 5Nmm2 (ISO 4587)Fixture Speed:Less than 2 hours with activatorFull Cure Time: 12 hoursMin Max Temp: -55°C - +150°C
Can be used on all types of engine components withstanding constant temperatures up to 270°C and intermittent temperatures up to 350°C.Colour : RedBase : SolventViscosity : 6,500cpsGap Fill : 0.5mm
Forms a tough, flexible gasket or seal that resists ageing, weathering and thermal cycling without hardening. Ideal for oil pans, transmission pans, differential covers, timing gears and valve covers. Suitable for sealing aluminium and metal ducting, refrigeration applications and hygiene seals.Colour : Black / RedBase : AcetoxyViscosity : PasteMin Max Temp : -55°C - +350°C (Intermittent)Skinning Time : 5 mins 20°C
Bondloc B574 cures when air is excluded between close-fitting metal surfaces. B574 is a general purpose medium-strength gasketing product for use on machined and rigid flanges.B574 is an Instant gasket which provides instant pressure resistance and has excellent chemical resistance. The thixotropic formula helps reduce the migration of the sealant after application to the mated surfaces.Ideal for gearbox sealing, pump flanges, transmission assemblies, cover plates on tanks, cam shaft sealing and bearing gaps.Colour: OrangeViscosity: 30,000 - 50,000cpsGap Fill: 0.3mmTensile Strength on Steel: Less than 8.5mm2 (ISO 4587)Fixture Time: Less than 30 minsFull Cure Time: 24 hoursMin Max Temp: -55°C - +150°C
Hylomar semi-hardening gasket joining compoundExcellent at gap fillingResistant to steam and automotive fluids: petrol, oil, water and anti freezeJoints easily dismantled for service and repairTemperature range: 40 to 250°c
Forms a tough, durable and flexible rubber seal.Replaces traditional gaskets.Resists most common automotive fluids (not fuel).Bonds to metal, glass, rubber, plastics and more.Temperature range: -50 to 250°C.
Forms a tough, durable and flexible rubber seal.Replaces traditional gaskets.Resists most common automotive fluids (not fuel).Bonds to metal, glass, rubber, plastics and more.Temperature range: -50 to 250°C.
LOCTITE® 510 is a high temperature and chemical resistant gasketing product that is ideal for use on rigid flanges.LOCTITE® 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing rigid flange faces on transmissions and engine casings. It ensures an instant, low-pressure seal. The product increases the torque capacity of assembled flanges.For metal flangesHigh temperature resistant flange gasketAdapts to flange surface irregularities and scratches up to 0.25 mmIncreases the torque capacity of assembled flangesP1 NSF Reg. No.: 123007
Gasketing product for machined metal flanges. Medium strength. For gaps up to 0.25 mm. 30 min fixture time.LOCTITE® 515 is a medium strength (6 Nmm² tensile shear strength), medium cure speed, methacrylate-based industrial gasketing product designed for machined, rigid metal flanges. The product, which cures anaerobically, is suitable for gaps up to 0.25 mm. It is used typically as a form-in-place product for pumps, thermostats, compressors, transmission housings and axle covers.Ideal for machined metal componentsPerfect seal between componentsFor gaps up to 0.25 mm
LOCTITE® 518 is a medium-strength, general purpose gasketing product with excellent contamination tolerance. Ideal for use on casted iron, steel and aluminium flanges.LOCTITE® 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. LOCTITE® 518 fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings.Semi-flexible, medium-strength anaerobic flange gasketFor active and inactive rigid metal flangesCures through minor surface contaminationAdapts to flange surface irregularities and gaps up to 0.25 mmGel-type consistencySeals instantly against low pressureReduces inventory costs – no need for large inventory of cut gasketsResists high pressure when fully curedNo compression set or misaligned gasketsEasy to automateReduces process costs – eliminates manual assembly of conventional gasketsNSF P1 Reg. No. 123758
Medium strength gasketing product for machined metal flanges where semi-flexibility is required.LOCTITE® 5205 is a medium strength (3 Nmm² tensile shear strength), methacrylate-based gasketing product that offers semi-flexible capability. Intended for use with machined, rigid metal flanges, the product is suitable for gaps up to 0.25 mm and cures anaerobically. It is used typically as a form-in-place gasket on gearboxes and engine casings.Medium strength, semi-flexibleFor gaps up to 0.25 mmDesigned for machined metal flangesCan be dispensed robotically
Medium strength gasketing product for machined metal flanges where semi-flexibility is required.LOCTITE® 5208 is a medium strength (6 Nmm² tensile shear strength), methacrylate-based gasketing product that offers semi-flexible capability. Intended for use with machined, rigid metal flanges, the product is suitable for gaps up to 0.125 mm and cures anaerobically. It is used typically as a form-in-place gasket on gearboxes and engine casings.Medium strength, semi-flexibleSeals close fitting jointsDesigned for machined metal flanges
Gasketing Product - general purpose. Ideal for use on machined and rigid metal flangesLOCTITE® 574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections. The nature of LOCTITE® 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.Excellent water and glycol resistanceIdeal for use on rigid metal parts, e.g. cast iron components and pump housingsHigh oil resistance
Flexible sealant paste that changes to a pliable, non-hardening film through solvent evaporation which seals flanges, fittings, connections, etc.LOCTITE® MR 5922 is a black, viscous, solvent-based, slow drying, flexible setting paste that changes to a pliable, non-hardening film through solvent evaporation. It is based on resin, isopropanol and fillers. It seals flanges, fittings, connections and flexible assemblies against leakage. It increases the reliability of gasket seals and it can be used for the repair of damaged pre-cut gaskets.Extends gasket lifePrevents leaksSlow dryingSpecifically designed to improve the sealing performance of pre-formed gaskets made of cork, metal, plastic, rubber, etc. in non-rigid assembliesFlexible settingIncreases the reliability of gasket seals
Silicone-based gasketing product suitable for various substrates. Good resistance to oil and joint movement.LOCTITE® SI 5900 is a low strength, moisture-cured, thixotropic silicone-based paste. Typical applications include stamped sheet metal covers (timing covers and oil sumps). It exhibits a rapid skin-over time of 15 min and is suitable for gaps up to 1 mm. As a single component it requires no mixing.Good oil resistanceWithstands joint movementReduces migration of liquid after applicationAdheres to metal, plastic, glass and ceramic materials
LOCTITE® SI 5910 is a low strength gasketing product for flexible flanges that has good resistance to oil and joint movement.LOCTITE® SI 5910 is a low strength, silicone-based gasketing product designed for use on flexible flanges with machined or cast surfaces (metal or plastic). It is suitable for gaps up to 1 mm and offers a cure-through volume (in 24 h) of 2.75 mm. Typical applications include stamped sheet metal covers (timing covers and oil sumps).Good resistance to oil and joint movementCan be supplied in cartridges, tubes or rocep cansFor use with flexible flangesReduces migration of liquid after application
Gasketing Product - multi-purpose flexible silicone sealant. Ideal for use on flexible flanges, machined or cast surfaces, metal or plastic.LOCTITE® SI 5926 is a multi-purpose flexible silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket. This product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Typical applications include valve covers, timing gear covers, differential covers, oil pans, transmission pans, water pumps, and thermostat housings. This product is typically used in applications with an operating temperature range of -54°C to 204°C.Multi-purpose flexible silicone sealant. Can be used on metal, plastic and painted partsResists vibration, thermal expansion and contractionOperating temperature range of -54°C to +150°C.
Metallic black, 1-part, thixotropic, room temperature vulcanizing oxime silicone paste sealant.LOCTITE® SI 598 is a metallic black, 1-part, thixotropic, room temperature vulcanizing oxime silicone paste sealant. It cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. It resists ageing, weathering and thermal cycling without hardening, shrinking or cracking. This product is typically used in applications with an operating range of -54 to +260°C.Enhances load bearing & shock absorbing characteristics of the bond areaExcellent resistance to automotive engine oilsTypical applications include oil pans, transmission pans, valve covers, valves and guides, timing gear covers, and differential covers